Hose rupture protection, 50 mbar, ¼" left-hand thread

Hose rupture safety device, 50 mbar, 1.5 kg/h, for installation between the gas pressure regulator and the hose line. The hose rupture safety device shuts off the gas flow as soon as the nominal flow rate is exceeded by 10%. Its use is mandatory in commercial applications for hose lengths of 40 cm or more.

Further specifications:

• Inlet: ÜM 1/4'' left-hand
• Output: 1/4'' left-hand male
• Operating pressure: 50 mbar
• Flow rate: 1.5 kg/h
• Approval: CE 

Safety and warning instructionsSafety instructions for 50 mbar ¼" left-hand hose rupture safety device:

- Before installing or maintaining the hose rupture safety device, ensure that the gas supply is completely shut off.

- Regularly check the condition of the hose and hose connections for any damage or wear.

- Only use the hose breakage safety device in accordance with the manufacturer’s instructions.

- Ensure that the hose breakage safety device is correctly connected to the hose and is securely fitted.

- Ensure that all connections are tight and securely fastened to prevent gas leaks.

- Keep flammable materials away from the hose breakage safety device.

- Avoid overstretching or twisting the hose to prevent damage.

- Check the hose breakage safety device regularly to ensure it is in good working order and have it inspected by a qualified technician if necessary.

- Observe all applicable safety regulations and guidelines for the safe operation of the hose breakage safety device.

Note: These safety instructions are intended as general guidelines. Please always consult the specific manufacturer’s instructions and safety guidelines for your product.