Truma Combi Heater 4E - iNet X Panel

The Combi 4 E combines all the advantages of the Combi 4 with those of an electric heater. In contrast to the Combi 4, it has additionally integrated electric heating elements. So you can operate the heater on the campsite with the 12 V power supply completely without an on-board battery. At the same time, the Combi 4 E requires very little power. The heater runs in gas mode for self-sufficient use, in electric mode at the campsite, and in mixed mode when outside temperatures are low. In summer, the Combi 4 E only heats the water without heating.

Like all Combi models, the Combi 4 E combines the functions of heating and heating water in a single device. The heater provides cozy warmth in your vehicle within a few minutes. At the same time, it heats the water you need for showering, rinsing or washing your hands. The clever thing about it is that you only have to install a single device in your caravan or motor home. This saves weight and space: in contrast to an S-heater, the freedom of passage in your vehicle remains fully intact.

You can regulate the temperature in your vehicle continuously on a digital control panel. In combination with the Truma iNet Box, you can already switch on your Combi 4 E on the go with the Truma App via smartphone.

This makes the Combi 4E special:

• Flexible to install, as extremely light and compact
• Warm air of the Combi 4 E is optimally distributed via four air outlets
• Gas, electric and mixed operation possible
• Digital control panel CP plus iNet ready: Automatic climate control in conjunction with a Truma air conditioner
• Automatic emptying of the water tank at low temperatures thanks to FrostControl

Attention: For the installation of the heater must necessarily be one of the two water sets dazubestellt! (Fir tree connection Art. 721912 or John Guest Art. 721913)

Technical data:

• Energy carrier: gas & electric
• Nominal heat output: 2000/4000 W
• Nominal heat output in electric mode: 900/1800W
• Efficiency: 98%
• Gas/diesel consumption: 160 / 335 g/h
• Burner power levels: 2
• Operating voltage: 12 V / 230 V
• Air flow rate: max. 287 m3/h
• Current consumption (12V): Average: 1.1 A
• Current consumption (230 V): 900 W 3.9 A / 1800W 7.8 A
• Resting current: 0.001 A
• Water capacity: 10 l
• Water heating time (from approx. 15° to approx. 60°C): Water tank approx. 23 min
• Pump pressure: max. 2.8 bar
• System pressure: max. 4.5 bar
• Weight (without peripherals): 15.5 kg
• Weight (with peripherals): 16 kg
• Installation dimensions LxWxH: 540 x 500 x 350 mm