Gas instantaneous water heater IWH-1.5 E

Gas instantaneous water heater IWH-1.5 E

Highly efficient copper heat exchanger with up to 92 % efficiency
Burner capacity 10 KW
Up to 60% less gas consumption than units with storage tank - constant reheating not necessary (absolute night sleep)
Stepless selection of water temperature (35 to 60°C) on the control panel
No corrosion, bacteria and legionella problems
Low weight, as there is no tank

724.45€ *

Prices incl. VAT plus shipping costs

Available, delivery time 10-21 days

Immediately ready for shipment

Order number: 67990

Order number: 67990

Pin it

Hot water is available in the caravan and motor home at any time and without preheating... more

Close menu

Hot water is available in the caravan and motor home at any time and without preheating immediately in "unlimited" quantity. A comfort that you are used to at home, can also be enjoyed on vacation. No matter how long you shower, no matter how many people - there is always enough hot water.

Technical data:

Approved in the following countries: AT, BE, BG, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, HR, IE, IS, IT, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK
Gas type Butane G30/ Propane G31: 30 mbar
Heater classification: Type C12 (Fanned)
Diameter of the exhaust pipe: 45 mm
Standard length of the exhaust pipe : < 15 mm (measured from the surface of the service door)
Nominal maximum input power: 10 kW
Maximum gas consumption: 765 g/h
Maximum gas consumption: 36 Mj/h
Minimum input power: 5 kW
Pressure at test port: 22 mbar
Efficiency: > 84 %
Maximum water pressure: 5 bar
Minimum water pressure: 0.5 bar
Minimum start flow: 1.5 l/min
Selectable water temperature: 35 - 60 °C (stepless)
Temperature increase at 3.3 l/m: 37.7 °C
Requirement for a stable minimum at: Cold water temperature maximum 15 °C
Water temperature of 35.5 °C: 3.3 l/min
Nominal supply voltage VDC: 12
Voltage range VDC: 10.5 - 15
Maximum current consumption: 0.44 A
Storage temperature (dry): 0 - 50 °C